- Unit/Units
- 1
- Piece/Pieces
- 00 INR
- Oil Regeneration
- Steel
- Automatic
- 220-440 Volt (v)
- 50-60 Hertz (HZ)
Regeneration is the restoration of used oil to virgin oil specifications, or even higher. The Oil Regeneration System we deal in, work through favoring the environment. The media in this system is to be reused many hundred times before recharging the system with new media. Our modified regeneration system uses dual banks of regeneration columns, which give uninterrupted operation of the system and regenerate oil in one bank, while reactivating the media in the other bank. It is the greenest technology offered today and rises as a revolution in the oil filtration industry where the consequent savings for the user in term oil is tremendous. The regeneration cycle of this system includes transformer or oil tank, heat and pre-filter, adsorbent media in columns,vacuum degasification & dehydration etc. This system has its applications in transformer oil, lubricating oil, hydraulic oil, engine oil, cable oil etc.
Features:
Stationary & mobile configurations.
Reusable Media, advanced design with superior quality.
Rejuvenates the life of oil and makes it an asset.
Manual /fully automatic with SCADA system.
Turnkey Solutions
- Installation
- Commissioning
- Customer service
- Spares
- Service and maintenance schemes
- Technical support network
Parameter | Unit | Used Oil | After Regeneration |
Appearance |
| Cloudy, brown | Sparkling, clear & transparent |
Colour |
| 3.5 | 0.5 |
Breakdown Voltage | kV | 15 | 70 |
Gas Content | % | 10 | 0.1 |
Interfacial Tension @27oC | N/m | 0.02 | 0.04 |
Neutralisation value | mg KOH/g oil | 0.5 | 0.03 |
Resistivity @27oC | ohm-cm | 1.0x10 | 1500x10 |
Resistivity @90oC | ohm-cm | 0.1x10 | 35X10 |
Tan delta @90oC |
| 1.0 | 0.002 |
Water content | ppm | 200 | 5 |
- Cash in Advance (CID), Cash Advance (CA)
- 1 Per Day
- 4 Week
- All India
Plot # 60 to 63, 4th Phase, KIADB Industrial Area, Malur, Karnataka, 563130, India
Phone :+918037401121